Makerspace
→
13:45 - 15:45
English
Workshop
Advanced
EmanziTech
Car-hacking Workshop with open source Hardware
Kurzthese
To start with Car-Hacking, I have built a simulated CAN-Bus-Network with 10 OBD-II interfaces.
OBD-II is the standard Car-Diagnosis-Interface since 2001(Petrol) / 2003 (Diesel).
We will use the MACCHINA M2 Car-Hacking Arduino and flash a basic Sniffer for the CAN-Bus Protocol.
We will retrieve CAN-Bus Data (coming from the simulated Car-Network) and visualize it in SavvyCAN.
OBD-II is the standard Car-Diagnosis-Interface since 2001(Petrol) / 2003 (Diesel).
We will use the MACCHINA M2 Car-Hacking Arduino and flash a basic Sniffer for the CAN-Bus Protocol.
We will retrieve CAN-Bus Data (coming from the simulated Car-Network) and visualize it in SavvyCAN.
Beschreibung
Here is my Agenda for the workshop on re:publica 2019:
- Why does every Car has a mobile?
- Communication inside of a car
- connected systems
- The CAN-Bus
- OBD-II (car-diagnosis-port)
- Car-Hacking
- Comma.ai
- Raspberry Pi and the picanshield
- Arduino and the Arduino CAN-Bus interface
- Machhina M2
- SavvyCAN
How can I prepare myself?
Bring your notebook (preferrably with a installed version of SavvyCAN)
Where can I get Savvycan?
You can Download it under http://www.savvycan.com
What will I use in the workshop?
for the workshop you will get:
- one can-bus Simulator
- one Macchina M2
- one Micro SD card
- one Micro SD-cable
Where can I get my own comma.ai device?
you can get your Panda (to retrieve your data) or your EON DevKit under the following Address https://comma.ai/shop.
Where can I get my own Macchina M2? https://www.macchina.cc/catalog
Can I have some more videos before I destroy my (or my parents) car?
Sure..
- I gave a talk as introduction to the CAN-Bus on the Easterhegg 2018
- Another Talk is about car hacking devices
- then there is a nice introduction to SavvyCAN